Skateboarding can be a form of art, a sport, a hobby, a job or a method of transportation.Skateboarding has been shaped and influenced by many skateboarders throughout the years. A 2002 report by American Sports Data found that there were 12.5 million skateboarders in the world. Eighty-five percent of skateboarders polled who had used a board in the last year were under the age of 18, and 74 percent were male.

Skateboarding is a relatively modern sport—it originated as "sidewalk surfing" in the United States—particularly California—in the 1950s. A key skateboarding trick, the ollie, was only developed in the late 1970s.


Before The Beginning

Predating the first skateboard, the New York Times reported on May 21, 1893 in an article entitled: DANGEROUS SPORT IN BROOKLYN: Coasting on Lincoln Place May Sometime Lead to Loss of Life" It begins:

Lincoln Place, {Park Slope} Brooklyn, smoothly paved with asphalt from the Prospect Park (Brooklyn) Circle to Fifth Avenue and has a slope about 15 degrees. During the past few weeks small boys from all parts of the neighborhood have gathered on Lincoln Place with little four wheeled carts, on which they have coasted down the middle of the Street…

Brooklyn Eagle article on July 18, 1897, "BETTER BROOKLYN STREETS" further explains how street engineering in Brooklyn enabled the above mentioned "cart coasting."

The great amount of asphalt and vitrified brick pavement that is replacing the noisy and miserably laid cobblestones, and even granite block... {would create} roads the smoothest in the country and as noiseless as can be provided for by the very latest scientific pavement…

The first skateboard

The first skateboard originated sometime in the 1950s and coincided with the initial popularization of surfing in California. The earliest skateboards were homemade and constructed of flat wooden planks attached to roller-skate trucks and wheels. Skateboarding was originally called "sidewalk surfing" and early skaters emulated surfing style and moves. Skateboards may or may not have evolved from "crate scooters." Crate scooters preceded skateboards, and were essentially similar except for having a wooden crate attached to the front, which formed rudimentary handlebars.

In the mid 1960s, skateboarding went mainstream. A number of surfing manufacturers such as Hobie and Makaha started building skateboards that resembled small surfboards and assembling teams to promote their products. The popularity of skateboarding at this time spawned a national magazine, Skateboarder Magazine and the 1965 international championships were broadcast on national television. The growth of skateboarding at this time can also be seen in Makaha's sales figures which quoted $4 million worth of board sales between 1963 and 1965 (Weyland, 2002:28). Yet by 1966 sales had dropped significantly (ibid) and Skateboarder Magazine had stopped publication. Skateboarding's popularity dropped and remained low until the early 1970s.

Second generation

In the early 1970s, Frank Nasworthy started to develop a skateboard wheel made of polyurethane,calling it the 'Cadillac' as he hoped this would convey the smooth ride it afforded the rider.[4] The improvement in traction and performance was so immense that from the wheel's release in 1974 the popularity of skateboarding started to rise rapidly again, and companies wanted to invest more in product development. Many companies started to manufacture trucks (axles) especially designed for skateboarding, and the modern design was reached in 1976 by Tracker Trucks. As the equipment became more maneuverable, the decks started to get wider, reaching widths of 10 inches (250 mm) and over in the end, thus giving the skateboarder even more control. Banana board is a term used to describe skateboards made of polypropylene that were skinny, flexible, with ribs on the underside for structural support and very popular during the mid-1970s. They were available in myriad colors, bright yellow probably being the most memorable, hence the name.

Manufacturers started to experiment with more exotic composites and metals, like fiberglass and aluminum, but the common skateboards were made of maple plywood. The skateboarders took advantage of the improved handling of their skateboards and started inventing new tricks. Skateboarders, most notably Ty Page, Bruce Logan, Bobby Piercy, Jared Phillips, Kevin Reed, and the Z-Boys, started to skate the vertical walls of swimming pools that were left empty in the 1976 California drought. This started the vert trend in skateboarding. With increased control, vert skaters could skate faster and perform more dangerous tricks, such as slash grinds and frontside/backside airs. This caused liability concerns and increased insurance costs to skatepark owners, and the development (first by Norcon,then more successfully by Rector) of improved knee pads that had a hard sliding cap and strong strapping proved to be too-little-too-late. During this era, the "freestyle" movement in skateboarding began to splinter off and develop into a much more specialized discipline, characterized by the development of a wide assortment of flat-ground tricks.

Skateparks increasingly contend with high-liability costs that led to many parks closing. Vert skaters therefore started making their own ramps and freestylers didn't need skateparks. Thus by the beginning of the 1980s, skateboarding had died again.

Third generation

The third skateboard generation, from the early/mid eighties to early nineties, was fueled by skateboard companies that were run by skateboarders. The focus was initially on vert ramp skateboarding. The invention of the no-hands aerial (later known as the ollie) by Alan Gelfand in Florida in 1976 and the almost parallel development of the grabbed aerial by George Orton and Tony Alva in California had made it possible for skaters to perform airs on vertical ramps. While this wave of skateboarding was sparked by commercialized vert ramp skating, a majority of people who skateboarded during this period never rode vert ramps. Because most people couldn't afford to build vert ramps or didn't have access to nearby ramps, street skating gained popularity. Freestyle skating remained healthy throughout this period with pioneers such as Rodney Mullen inventing the basics of modern street skating; the flatground ollie, the ollie kickflip, the heelflip, and the 360 flip, to name a few. The influence freestyle had on street skating became apparent during the mid-eighties, but street skating was still performed on wide vert boards with short noses, slide rails, and large soft wheels. Skateboarding, however, evolved quickly in the late 1980s to accommodate the street skater. Since few skateparks were available to skaters at this time, street skating pushed skaters to seek out shopping centres and public and private property as their "spot" to skate. Public opposition, and the threat of lawsuits, forced businesses and property owners to ban skateboarding on their property. By 1992, only a small fraction of skateboarders remained as a highly technical version of street skating, combined with the decline of vert skating, produced a sport that lacked the mainstream appeal to attract new skaters.

Current generation

The fourth and current generation of skateboards is dominated by street skating. Most boards are about 7¼ to 8 inches (200 mm) wide and 30 to 32 inches (810 mm) long. The wheels are made of an extremely hard polyurethane, with hardness(durometer) approximately 99a. As Steve Caballero had shown on vert in the mid-80's, very high durometers offer the benefit of reduced drag on hard surfaces which results in an overall faster ride, so long as one avoids rougher terrain. The wheel sizes are relatively small so that the boards are lighter, and the wheel's inertia is overcome quicker, thus making tricks more manageable. Today, modern wheels are currently around 48 to 60 mm in diameter and advances in technology have made them extremely light compared to the wheels of the eighties. Most decks are still constructed out of Canadian Maple, with 7-plies being the industry standard for strength and durability. Board styles have changed dramatically since the 1970s but have remained mostly alike since the mid 1990s. The contemporary shape of the skateboard is derived from the freestyle boards of the 1980s with a largely symmetrical shape and relatively narrow width. This form had become standard by 1992. During the 90s ramp or vert skateboarding dropped in popularity.

While street skateboarding remains popular, its rigid conformity and high attrition rate (85% of skateboarders leave the sport by the time they reach age 18)[7] does not appeal to everyone, and there is a resurgence of other types of skateboarding brewing. Longboarding, speedboarding, downhill sliding, pool or bowl skating, slalom, and ditch skateboarding are thriving all over the world, albeit below the radar. (Credit: Wikipedia).


Jump On Board, by Greg Tingle - Cover - Article

The other extreme

Sports and personality management - Why it is needed, by Greg Tingle & Yvette Moore


Dion Appel, Founder and CEO - LifeLounge - 5th June 2003

Brad Carrol, Director, Standing Eight - 1st September 2003




Channel V

Bondi Beach Skatepark

Press Releases

Standing Eight supports Media Man Australia - 25th August 2003

Media Man Australia